Norwalk Juicer and PURE Juicer Comparison

  • News
  • By PURE
  • 8 min read
Norwalk Juicer 290 (left) and PURE Juicer (right) side by side

PURE no longer makes juicers. This comparison is kept as a record of the PURE Juicer and the Norwalk models as they were sold. Prices and terms are no longer shown.

If you were in the market for a two-stage and cold-press juicer there were really only two options.

We got asked a lot how our PURE Juicer compared to the traditional Norwalk Juicer. While to the novice they may look the same, there are actually many significant differences between them. We like to focus on just a few key features that make a big difference. The PURE’s:

  • Cutter and offset feed tube are better – no pre-chopping required.
  • Cold press makes more juice at its higher pressure
  • Is easier to clean and wipe down

You also get more juice per squeeze, your mileage may vary.

Left: Norwalk Juicer 290 Right: PURE Juicer

Norwalk Juicer 290 (left) and PURE Juicer (right) side by side

While both Mercedes and Chevrolet have four tires and a steering wheel they are not the same. PURE has taken two stage juicing to an all new level.

The most obvious difference is the PURE Juicer’s modern gorgeous design with smooth rounded edges it is countertop eye-candy in any kitchen. Design is built in, not an afterthought, you’ll be glad you picked the pretty one.

TOP DETAIL

Symmetrical or Asymmetrical?

Norwalk Juicer

The Norwalk is asymmetrical, with a slower motor, to accommodate the motor length creating a clunky design.

Top of the Norwalk juicer

PURE Juicer

PURE designed a custom motor with more power but shorter in length allowing for a smooth modern design.

Top of the PURE Juicer, with a smooth, symmetrical housing

Norwalk Juicer

Cluttered design, posts, screws, sheet metal overlaps and seams.

Top of the Norwalk juicer

PURE Juicer

Smooth clean modern design.

Side of the PURE Juicer, with smooth, clean lines

A core principle of good design is “form follows function”. Good design goes beyond appearance; so the difference truly is in the details.

Norwalk Juicer 290

The Norwalk Juicer Feed has too much offset. This requires pre-chopping. Also, the feed tube transition into the cutting chamber is not a smooth transition also making it hard to feed produce. Finally, the feed tube is a massive 4lbs.

Feed tube and feed pan of the Norwalk Juicer

PURE Juicer

The PURE Juicer Feed has the perfect offset. No pre-chopping required. Also, the feed tube transition is smooth transition making it easy to feed produce. Finally, the feed tube is only 3lbs!

Feed tube and feed pan of the PURE Juicer
ITEM PURE JUICER NORWALK 280 NORWALK 290
OFFSET FEED TUBE, KICKBACK FREE Correct Offset No chopping No Wrong Offset Requires Pre-Chopping
FEED HOUSING ATTACHMENT One-hand, Twist & Lock Two Wing Nuts Two Knobs & Knob Wrench
FEED TUBE & FEED PAN, WEIGHT 3 lb 15 oz 4 lb 2 oz 5 lb

Best of all, the PURE Juicer’s patented twist and lock feed tube makes it very easy to take it apart for cleaning and it effortlessly clicks back together to make another juice. No wing nuts or screws – just an easy push of a button. Also no pre-chopping, just feed your produce straight into the PURE 8 tooth cutter.

Norwalk Juicer 290

Norwalk provides a small wrench to tighten the attachment knobs

Norwalk Juicer feed housing attachment, shown from one side Norwalk Juicer feed housing attachment, with knobs and knob wrench

PURE Juicer

Patented, One-hand twist and lock attachment

PURE Juicer one-hand twist-and-lock feed housing, unlocked PURE Juicer one-hand twist-and-lock feed housing, locked

Press Chamber Detail

The larger PURE press chamber with the central side post allows for easier and more comfortable access and as well as a taller a deeper press chamber to work in. there are no corner posts to block access when placing pulp packs.

It also means you can press three pulp packs instead of just two and press up to 50% more juice in one squeeze.

Norwalk Juicer 290

Think about cleaning this?

Press chamber of the Norwalk Juicer 290, with corner posts

PURE Juicer

Single wipe & you are done.

Press chamber of the PURE Juicer, with a single central side post

PURE Cutter Detail

Easy to recognize, a significant difference is that the PURE cutter comes with eight teeth instead of five to better cut your produce, especially greens. This will enhance your juicing experience by providing a smoother, and more efficient cut.

Two PURE stainless steel cutters: straight tooth and serrated

PURE Cutters were available in two styles:

  1. Left, #304 stainless steel straight tooth (same material as Norwalk)
  2. Right, #440C surgical grade stainless steel cutter with serrated teeth, heat treated and hardened to Rc55. Same as what is commonly used in surgeons scalpels and chefs knives. The benefit of this PURE Cutter is that it rarely or never needs sharpening.

PURE vs. Norwalk

Left: Norwalk Juicer, five tooth cutter, #304 SS

Right: PURE Juicer, eight tooth serrated cutter, #440C SS

Norwalk five-tooth cutter (left) and PURE eight-tooth serrated cutter (right)
ITEM PURE JUICER NORWALK 280 NORWALK 290
PRESS PRESSURE 5400 lbs / 23.5 kN 4500 lbs / 20 kN 3930 lbs / 17.5 kN
PRESS TIME LIMIT None 10 seconds None (see press pressure)
YIELD CARROT / APPLE PER 1000g 761 g 688 g 671 g
YIELD CARROT, 1000g 725 g 552 g 568 g
YIELD APPLE, 1000 g 811 g 762 g 766 g
Yield Lettuce, 1000g 661 g 521 g 602 g
Press Chamber Height 107 mm 92 mm 92 mm
Press Chamber Volume 16.6 cu in / 2730 cm3 9.7 cu in / 1590 cm3 9.7 cu in / 1590 cm3
Max Yield Per Press Cycle 34 oz / 1000 ml 25 oz / 750 ml 25 oz / 750 ml
Press Capacity, maximum 6 cups 4.5 cups 4.5 cups
Press Capacity, recommended 6 cups 2 cups 2 cups
Press Chamber Capacity 1500 g 1100 g 1100 g
Sealed Press Chamber Yes No Semi
Seamless Press Chamber Yes No No
Press Chamber Access Easy Cramped Cramped
Press Up: Time 15 seconds 20 seconds 20 seconds
Press Down: Time 4 seconds 6 seconds 6 seconds
Feed Tube, flared to minimize waste Yes No No
Curved Pusher, to Reduce Heat & waste Yes No No
Cutter, Hardened Steel? Yes or No No No
Cutter, Alloy Stainless Steel 304 or 440c Stainless Steel 304 Stainless Steel 304
Cutter, # Teeth 8 5 5
Cutter Sharpening, Residential Periodic or Rarely Periodic Periodic

Juice Tray Detail

As you can see right away, there is a big difference in size. Not only is the PURE Juicer tray deeper, 7″ vs 6″, but the press chamber that the pulp packs are pressed in is 1/2″ taller as well.

Juice tray of the Norwalk Juicer (left) and the PURE Juicer (right)

Left: Norwalk Juicer

Right: PURE Juicer

Press Plate Detail

PURE’s is cast from stainless steel in one piece.

Norwalk’s is cast aluminum plus an assortment of washers, screws and stamped steel.

Press plate of the Norwalk Juicer (left) and the one-piece stainless steel PURE press plate (right)

Left: Norwalk Juicer

Right: PURE Juicer

Protective Bumper Detail

To prevent damage to the juicer body by the collection bowl scuffing on the front of the juicer front.

Norwalk Juicer 290

Think about cleaning this?

Front of the Norwalk Juicer 290 with a scuffed front panel

PURE Juicer

Single wipe & you are done.

Front of the PURE Juicer with its protective bumper

Press Handle Detail

Notice how the PURE handle is built-in as part of the design, rather than added as an afterthought?

Also notice the thickness of the base plate, the PURE is double the thickness and 8x the stiffness. The PURE Chassis is strong and does not flex.

Norwalk Juicer 290

Press handle of the Norwalk Juicer 290

PURE Juicer

Press handle of the PURE Juicer, built into the design

Another example for thought-through design are the grids.

Each PURE grid is made individually (not cut from a big sheet). This process enables us to number every grid for easy identification and makes for a smooth sided shape with no sharp edges. It increases the ‘open area’ of the grid from 61% to 75% reducing clogging and allowing pulp to flow through the grid without overheating.

What this means to you is an easy to identify, user-friendly grid that requires less push force to triturate your produce.

Grid plates for the juicer, individually made and numbered

PURE Juicer Reviews

To find out how attention to detail can make a big difference, check out our complete side-by-side comparison chart:

TWO-STAGE JUICER COMPARISON

ITEM PURE JUICER NORWALK 280 NORWALK 290
Removable Press Plate Yes No No
Press Plate Material Stainless Steel 304, 1pc Aluminum, 4 pc + 6pc Screws Aluminum, 4 pc + 6pc Screws
Press Plate Dishwasher Safe Yes No No
Guide Rail / Post Yes No Yes
Tall Sloped Tray Yes Yes Yes
Drive Belt Reinforced Non-Slip/Stretch Yes No No
Lowered yield due to drive belt stretching? No Yes Yes
Anti-Scuff Bowl Bumper Yes No No
# of Grids 8 6 6
Grid Edges Smooth Sharp (postage stamp) Sharp (postage stamp)
Grid Sizes, Numbered Yes No No
Cloths 6 4 4
Bags 4 4 4
Food Contact Parts Stainless Steel Stainless Steel Stainless Steel
Thermally Protected Motor Yes No No
Length, Width, Height (inches) 15” x 15″ x 17 15” x 15” x 17” 15” x 15” x 17”
Length, Width, Height (mm) 381 x 381 x 419 381 x 381 x 432 381 x 381 x 432
Net Weight 65.6 lbs / 29.8 kg 58 lbs / 264 kg 62.3 lbs / 28.3 kg
Shipping Weight 72 lbs / 31.8 kg 69 lbs / 31.4 kg 72 lbs / 31.8 kg
Voltage 100-120 / 200-240 100-120 / 200-240 100-120 / 200-240
Method to Change Voltage Easy access switch Inside motor, change wires Inside motor, change wires
Power Supply Cord IEC receptacle, 32” / .8m Hard wired, 54” / 1.3m IEC receptacle, 54” / 1. m

Norwalk Update: November 2021

The Norwalk Juicer Company closed its doors in November 2021 after 87 years, and it is sadly missed by the entire juicing community. PURE Juicer then became the only two-stage juicer available. Created in 2016, PURE Juicer innovated two-stage juicing and the juicing experience through modern technology and customer input.

We did not anticipate Norwalk going out of business. Our community is full of Norwalk and PURE Juicer owners with the same goal of living healthy lives and drinking the best true cold-pressed juice a home juicer can make. Knowing many in our community would need parts and/or services for their Norwalk, we worked on ways to support you.

PURE Juicer made all its juicing parts from food-grade stainless steel. We redesigned the feed tube for easier use and less kickback, incorporated an eight-tooth stainless steel cutter, and increased the pressing force to 2.5 tons. These changes produced the highest yield and a better juicing experience.

In an effort to carry the legacy of two-stage juicing forward and to support the community who were unsure what to do next, we shared what we could do:

Our commitment is to our community. We welcome your questions and comments. And we hope to see everyone juicing for years to come.

Sincerely,
David Feinberg
CEO & Founder of PURE

This article is for educational purposes only and is not medical advice. Talk to your doctor before changing your diet, especially if you have a health condition or take medication.

The PURE MVP

Ten strokes and you're done

Vacuum-seal the wide-mouth mason jars you already own. No batteries, no charging, no motor.

Jars sold separately. Works with any wide-mouth mason jar.